'50 foot rs232 cable, rs-232 cables.'

Mark (63.176.159.185) -

I am trying to connect our CNC machine to a computer in an office about 50 feet away. I keep getting data transfer errors unless I set the speed very low. The fastest communications is 1200 baud.

Does anyone have any idea what the problem might be?

I tried to learn how to make rs232 cables for cnc but it was too frustrating.

Comment #1 gar (70.227.204.254) -

Mark:

See my message to Barney.

.

Comment #2 Sams from India (Contact Member) -

I think the configuration at the receiver's end is to be checked, that is why you are getting the data transfer error at higher speed.

Comment #3 Doug Lien from Osakis, Minnesota (Contact Member) -

Black box makes cords for the 50 foot length.

Comment #4 PAUL (81.179.24.104) -

Hi mark, I am having the same problem with a haas vf6. My cable is only 20ft long. Can you let me know if you found a solution.

Thanks Paul.

Comment #5 sudarwanto (202.93.37.101) -

Hi Mark

Please your check:

1.wiring port rs 232c machine to pc (ok/no)

2.setup parameter chanel machine to pc

3.setup baudrate, codetype, receivebuffer, linecode

what is make use software and machine controll?

thanks please your try agains and meekly only

E-Mail:         

Name:            (required)

Title:           (required)

Message (do not enter emails or links or urls in the message!):