'NUM 1040'

• For the ultimate in speed: Up to 4000 ft @ 115.2 kbaud 12 times faster! •

Rafael Kilim (88.144.37.163) -

Help!

I have a Bumotec CNC milling machine (S91)Machine year 2001. We had a electric spark in the building electricty system and since then, the machine is displaying on the main NUM processer, with a red light light over the word HALT. Also, the screen only flickers for a second, but then it goes blank. It looks like all the software in the NUM controller etc has disapeared. Does anyone have any views? I would appreciate any help in this matter. I have no copy of the software, and wouldn't know how to load it.

Comment #1 mark (68.179.9.9) -

try circuit cnc in the uk

Comment #2 hatem (217.69.183.35) -

hello dear

i have one cnc drilling machine

i have a problem in the keyboard of NUM 720F

i don't know where can i get spare for this keyboard

i contact num company but no one reply

can u help?

Comment #3 Steve Moore (85.95.108.225) -

Hello

Please be advised you can Contact Num in the uk at the following number;

Tel 0871 750 4020

Fax 0871 750 4021

Or email service.uk@num.com

Or Post to

Num (UK) Ltd

Unit 3 Fairfield Court

Seven Stars Industrial Estate

Coventry

CV3 4LJ

Comment #4 Prashant from India -

The problem seems to be with the Auto Card , as you say that there was a electric short circuit , there are EEPROMS in the auto card and probably due to the short circuit the data might have been deleted. You will have to reload the data in the Auto card.

Try first by just pressing the CHAR button on the processor board then on the crt a page comes there you have many options indicated , then press the option clear RAM then after that press shift and XOff key on the key board you will go back to the same page , then press option Initialise if even after this the Systems does not boot you will have to load the data in the Auto card

Comment #5 Osama Elhosieny (41.232.149.87) -

Dear sir

I need any information about what happen if I take the processor or memory board from one machine and put it on anther machine? Where I have 4 machines with controller NUM750

Best regard

Comment #6 Devendra Bakhshi (203.78.212.2) -

Dear Sir,

We have NUM control CNC P1040GC crush roll grinding machine.Recently this machine was rebuilt in UK and now we have this machine since 1 year.Today one of F Funtion key is not working and we are unable to run this machine.Please advice if there is service in india.

CNC System-P1040GC

CN NUM Power 1040

24VDC

Or.no.

Or no.-0005023889/0011000

Sr. No-218429

LCD Monitor

8.4"NUM

0209 206 209

18-36VDC:

0.75A (MAx)

Comment #7 Marco G. from U.S -

HELP!

I have a 1996 Pegasus 306 CNC on the front of my terminal it reads NUM 1060. It was working fine until we moved the machine to a different shop. Now when I boot the computer. It has bus error. There is red light on the des led which I think indicates a fault on the card. I already tried pressing raz button on power supply rack in the main rack but nothing.

Any suggestions will be appreciated.

Comment #8 jose (200.67.52.6) -

Help!

I`m working the cnc machine record 130 this have the NUM 1040 but in the remote card 16/16 we have fisical input but the output it`s off, in the screen of I/O showme that the output its ok!

any comments will be appreciate.

thanks.

Comment #9 RAVI_MATE (203.145.134.195) -

Dear sir,

as you discuss in this article that you have 4 machines with controller NUM750, if you replace any one of card i.e memory or process card then alarm will displaced on crt unit "RE-Initilise Table , Press Y or N .

if you press y than all your machine parameter will vanish.

you can replace two card i.e. memory card & personality module at a time (small pcb card on process card) .

thanks

Ravidas Mate

Comment #10 Chris (2) from Greece -

Hello,

I have a CNC NUM 1062W for glass cutting.

The two(2) internal 1, 2V ni-cd battery wend under voltage.

I replaced then with new one and the machine asked for RAM clear.

I answered YES and after this step the machine has no program inside.

I have a PC connected with the NUM 1062W. Does any one know how to reprogramm the CNC from the PC or any other way?

I think a have the backup program to my PC.

Thanks a lot.

Comment #11 mahesh (123.239.96.172) -

hi

i have num1060 cnc gear hobbing machine cooper pfauter make

& have major problem about this system that system indicate

N_POS alarm on screen in running cycle & machine stops at that position (on X axis), but there is no any discription about this error in machine manuals. So pl. tell me why is error ocures & how can solve this problem

Comment #12 Girish Attarde (116.72.192.160) -

hi

Devendra Bakhshi pl give reply on the girish.attarde@yahoo.com

for num service in india.

Comment #13 Tyke Eng (86.138.17.192) -

Hello

You all seem to be asking questions that your local Num Office or support can give you. If you check out www.num.com you will see on the contacts page your help centre. Note any country that is not listed contact the head office in Switzerland. They speak many languages and will assist you as soon as possible

eg see below;

India

Peschel Dynamics

Vishwaksupa

8. No. 1. Hissa No. 4

Nahsegaon, Pune - 411 041

India

Phone +91 20 3241 6980

Fax +91 20 2431 7310

Mail info@pescheldynamics.com

Switzerland

NUM AG

Battenhusstrasse 16

CH-9053 Teufen

Phone +41 71 335 04 11

Fax +41 71 333 35 87

Mail sales.ch@num.com

Service: service.ch@num.com

USA

NUM Corporation

603 East Diehl Road, Suite 115

US-Naperville, IL 60563

Phone +1 630 505 77 22

Fax +1 630 505 77 54

Mail sales.us@num.com

Service: service.us@num.com

Comment #14 Anil Nili & Sachin Kulkarni from Pune, India -

This is regarding the machines fitted with NUM Controller presently working in your company.

From this year onwards under the name of PESCHEL DYNAMICS we have commenced to give support for NUM range for products.

Please find below the address & contact details for SUPPORT / SPARES for NUM range of products.

PESCHEL DYNAMICS

Vishwakrupa Building,

Sr.No. 1, Hissa No. 2,

Narhe gaon, Pune.

Phone: 020 – 32416980. Fax: 020 – 24317310.

Email: info@pescheldynamics.com

We request you to please give us the details of the controller, drives as well as the machine details.

If you can give us the AFFAIRE no. it will be useful in providing / suggesting you the spares & their availability.

In anticipation of your response.

This is for your information & further needful action.

Thanks & Regards,

Anil Nili & Sachin Kulkarni

Mobile No. 0091 9370222109 & 0091 9371011131

Comment #15 Alex (2) from Milwaukee -

"Num Equipment"

Group Schneider sold off Num back in 2006. There was a very real reason for this decision. While owned by Square D/Group Schneider, at least in the US, Num equipment had proven itself to be not very robust, and extremely difficult to program and even more difficult to service. (Good luck finding replacement parts.)

I've used the 1040, and yes it is fast, however it's quirky. Software called Num Backup can restore the OEM programming back into the CNC, but you will need to know where in memory to place the programming, and it doesn't always load into memory properly.

Re-control your machines with someone else's CNC and drives if you want reliable production.

Comment #16 gemalyn lumaad (116.50.217.90) -

"impex coordinator"

How can we do with our CNC 1040W router machine, after using for 3 weeks, its accidentally disappear all encoded program.

after what happened in this machine, we encoded again all the programs which has been encoded before. but after encoding the controller of this machine can not communicate because there is message appear in the monitor "SECU MODE"

now, this is our problem, how can we remove this "SECU MODE" so the machine can work and can both communicate the machine and the controller.

please help me to fixed this problem.

thanks,

gemalyn lumaad

Asia Wood International Corporation

Philippines

Comment #17 thet tun oo (203.81.166.2) - Mon Aug 9 21:59:47 2010

"NUM problem"

Dear sir

i am thet tun oo

I have NUM MC, I download PLC bin file to 1040, but can't be.i used NUMCOM software, Rs232 cable.Time out error, Please help me for thar

THETTUNOO

E-Mail:         

Name:            (required)

Title:           (required)

Message (do not enter emails or links or urls in the message!):