CNC Machine Logo
CNC Machine forum Logo
Last update: 03/14/10 16:28
CNC Machine RSS Feed Computer Numerical Control
CNC Troubleshooting

'Tool Change Problem'


• For the ultimate in speed: Up to 4000 ft @ 115.2 kbaud 12 times faster! •

Post your related message now. 		• Industrial RSS Feeds
• Local Directory

• Home Page • Forum • Blog • Photos • Links • Connection •


CNC Machine Forum --> Read New Messages • Post New Message


(Login / Register)

Interact
  • Tweet This
  • Facebook This
  • Photo Gallery
If you have any questions or comments, please post a new message or a follow up.
Related Resources

Top Searches: • tool changing in cnc milling • tool changer for cnc problems • problems with cnc tool changer •
More: CNC Troubleshooting

Tool Change Problem

• Page 1 (Original Post) •

Eric MFG from Mass (Contact Member) - Wed Jan 27 23:02:50 2010

Hi,

I have a 92 Mycenter1 and having problems with the tool change operation. In MDI mode I call up a pot number the machine responds, when I type in command M6 the pot drops down as should but the spindle spins at 1000 to 1100RPM rather than the slow RPM I’m use to seeing. Then the spindle stops then nothing happens no ARM movement. The same happens when a program is run.

Could someone shed some light on this problem?

Thanks In advance,

Eric

Comment #1 Stevo1 from USA (Contact Member) - Thu Jan 28 08:34:10 2010

"more info"

Eric,

I am not fimilar with your machine. First off what kind of control do you have on the machine?

It could be a few things. Does your machine run a macro program for the tool change? Sounds like you are missing the spindle orientate. Does the program just freeze and if so what line does it freeze on? Check to make sure all of your positioning sensors are being made. Tool change programs will in a sequence and not proceed to the next until the FIN signal is met for each.

Stevo

• Page 1 (Original Post) •
You are not logged in. It is recommeded that you post messages and comments with a CNC Machine profile. You will be protected from spam and have more features. Registration is quick and easy. You can also post as a casual user with the form below. As a casual user your IP address will be published! You must be a registered used to include a link.

REPLY to this message:

Tool Change Problem; CNC Troubleshooting

OR

Post a NEW MESSAGE

33

Please submit a new reply here. HTML is not allowed and you are encouraged to seperate your paragraphs with a double blank line for readablity. Please make sure your message is relevant to , CNC Troubleshooting, and this message:

Tool Change Problem; CNC Troubleshooting
E-Mail:
Your email address is required. It will not be published.

Everything you enter below will be published. 

Name:            (required)

Title:           (required)

Message (do not enter emails or links or urls in the message!):
You must be registered and logged in to include a link with your message. Others will also be able to contact you without disclosing your email address.
Submit Reply. Please do not submit the same message more than once.



Have you added a link to us from your website? (3869):
  • <a href="http://forum.thecncforum.com">CNC Machine</a>
  • <a href="http://forum.thecncforum.com/CNC_Troubleshooting">Tool Change Problem; CNC Troubleshooting</a>
Tool Change Problem; CNC Troubleshooting All trademarks, copyrights and brands are the property of their respective owners.
(wezuzeepzwwt)

Privacy & DMCA Policy -- Those who twitter us!
CNC Troubleshooting 'Tool Change Problem'