'siemens CNC 880'

cool (81.22.77.166) -

Hi every body, I've found a problrem installing sinumerik 880 , after transfering CN and PLC parameter(TE1, TE2, RPA, ZOA, TE5..) the card ref: "6FX1131-5BA00" doesn't work (interfacing V24) a red D.E.L CPU fault is lighting, the error message " 67 connection coupl.calculator defect" on the CN screen.please how to fix this problem.

regards

Comment #1 kanzas davey (216.123.246.211) -

we have a vdf withn sinumerik controls that is showing an alarm for (reference point not active 7012), do you have any ideas how we can set the reference point value.

Comment #2 pravin (203.39.81.20) -

pls send me drawing & programming

Comment #3 Nasser Sangnour (217.219.136.66) -

Dear Sirs,

After transfering TEA1&TEA2 to sinumerik 880M, the serial interface CPU indicates fault and the error 67 appears on screen. Please, how can I fix the problem?

Best regards,

sangnour

Comment #4 andrija (195.29.32.170) -

Can somebody tell to me wich password is need to run Siemens 880 on Index C-200?

Comment #5 Jesus Ramon Lopez Ollero (163.157.254.25) -

CHANGE ENCODER IN ONE HEADING WITH DIFFERENT IMPULS

How is possible to change Encoder Heading (Cabezal) with different resolutions of impuls.

Thanks

Comment #6 vio (207.49.66.19) - Tue Feb 2 20:34:21 2010

"To: cool & andrija"

67 alarm: you can get to MACHINE BITS 1, see MD5018 and set to '0' bits 6 and 7, after that REBOOT. ALARM will disappear.Also original password can be:1111. After is possible to be series of the machine 4 digits.

Good luck,

Comment #7 mark (24.199.136.226) - Wed Mar 10 10:33:06 2010

"880 controll"

i have an alarm 1121 clamp monitoring does anyone kwow how to resolve this problem

E-Mail:         

Name:            (required)

Title:           (required)

Message (do not enter emails or links or urls in the message!):